9,000 lbs Two-Post vehicle lift for fleet, municipal and government service bays. Available on Sourcewell and NASPO cooperative contracts for streamlined agency purchasing: request a quote for pricing, freight and installation lead times.
The Challenger CL10-XP9-2 is a 9,000 lb capacity two-post vehicle lift with drive-on express service pads, engineered for high-throughput service environments. The 2-foot column extension accommodates facilities with 14-foot ceilings, while the drive-on pad design eliminates manual arm positioning for rapid first-try vehicle spotting. ALI and ETL certified, this surface-mounted lift features reinforced flip-up ramps, a 48-inch elongated carriage, and oversized 5-inch pulleys with heavy-duty cable equalization. Standard equipment includes column-mounted storage caddies for spotting blocks, dual integrated rubber door guards, and a padded overhead shutoff system. Optional QuickCycle technology reduces rise time to 27 seconds for express bay operations.
Specifications
Specification
Value
Capacity
9,000 lbs
Max Load Per Arm
2,250 lbs
Rise Height
70 in
Overall Height (Standard)
140 in
Overall Height (Cylinder Extended)
143 in
Overall Height (2-ft Extension)
164 in
Overall Width
138.5 in
Inside of Columns
110 in
Drive-Thru Clearance
90 in
Platform Height
2.25 in
Platform Width
24 in
Platform Length
58/66.5/75 in (adjustable)
Width Between Platforms
31.5 in
Floor to Overhead Switch
134.5 in
Minimum Ceiling Height (Standard)
12 ft
Minimum Ceiling Height (2-ft Extension)
14 ft
Pulley Diameter
5 in
Cable Diameter
5/16 in
QuickCycle Rise Time
27 seconds (optional)
QuickCycle Lower Time
17 seconds (optional)
Power Requirements
208-230V, 1PH, 20A
Lift Type
Two-Post Surface Mounted
Configuration
Drive-On Express Pad
Key Features
Drive-On Express Pads
Low-profile drive-on pads eliminate manual arm positioning entirely, allowing vehicles to be spotted accurately on first attempt without adjusting swing arms or adapters, maximizing bay throughput for express service.
Flip-Up Access Ramps
Reinforced front and rear access ramps flip up and lock to extend platform length from 58 inches to 75 inches, accommodating longer wheelbase vehicles while maintaining structural integrity under load.
2-Foot Column Extension
Extended columns raise overall height to 164 inches when cylinder is fully extended, requiring 14-foot minimum ceiling clearance and accommodating taller vehicles in facilities with higher bay heights.
Heavy-Duty Equalization
Oversized 5-inch diameter pulley and 5/16-inch cable reduce stress on the synchronization system, increasing component life while ensuring balanced lifting across both columns during operation.
48-Inch Carriage Design
Elongated carriage provides extended bearing surface and increased structural support, distributing load forces more effectively to extend operational life and reduce maintenance requirements.
ALI/ETL Certified Safety
Meets ALI/ANSI safety standards and ETL electrical certification requirements. Features fully gusseted base plates, padded overhead shutoff system, and single-point pulley-less lock release for compliant operation.
Ideal Applications
Frequently Asked Questions
What is the ceiling height requirement for the CL10-XP9-2?+
The CL10-XP9-2 with 2-foot column extensions requires a minimum 14-foot ceiling height to accommodate the 164-inch overall height when the cylinder is fully extended. Measure from finished floor to the lowest obstruction including lights, HVAC, or structural elements.
What is included with the CL10-XP9-2 lift?+
The lift includes the complete two-post assembly with drive-on pads, (4) 1.5-inch rubber spotting blocks, (4) 3-inch rubber spotting blocks, (2) column-mounted storage caddies, reinforced flip-up ramps, dual rubber door guards, power unit with hydraulic components, anchor hardware kit, and installation/operation/maintenance manual.
What is QuickCycle technology and is it standard?+
QuickCycle is an optional upgrade that reduces rise time to 27 seconds and lowering time to 17 seconds, approximately 30 percent faster than standard cycle times. This productivity enhancement is ideal for high-volume express service bays but requires selection at time of purchase.
How can I purchase this lift through cooperative contracts?+
Liftnow is an authorized dealer offering this equipment through Sourcewell contract 121223-LFT, NASPO ValuePoint CW7256, and FSA contract 23-EQU21.0. Government agencies, schools, and nonprofits can leverage these competitively solicited contracts for compliant procurement.
Get the Challenger CL10-XP9-2 for Your Facility
Contact Liftnow for pricing, installation services, and cooperative contract purchasing options. Our team can assist with facility assessments, anchor placement planning, and professional installation coordination.
One vendor, one PO, full warranty: Liftnow sells, delivers, and installs the lift and passes through the manufacturer’s warranty, with no separate suppliers and installers to coordinate.