Coats 10,000 lb Scissor Low Rise Pad Lift
Coats 10,000 lb Scissor Low Rise Pad Lift supplied by Liftnow on Sourcewell and NASPO cooperative contracts, freight and installation included.
Have product questions? Call our customer care: 24/7 SUPPORT 1-800-LIFTNOW
Overview
The Coats 10,000 lb Scissor Low Rise Pad Lift is supplied by Liftnow on Sourcewell and NASPO cooperative contracts, with freight and installation coordinated on a single purchase order.
The Coats 10K Low Rise Cantilever Pad Lift is a surface-mounted, low-rise cantilever pad-style vehicle lift rated at 10,000 lb. It collapses to a 4" drive-over height and rises to 21.4", with an overall footprint of 78 1/2" x 92 1/2" and an open drive-thru design. It is powered by twin hydraulic cylinders and a US-made Bucher pump/motor, with auto-engaging mechanical locks and a mechanical lock foot release on both sides. Four 1 1/2" low pads and four 3" medium pads are included; truck pads and a light-truck frame adapter are sold separately.
Configurations
Liftnow can quote any of these on the same cooperative contract.
Specifications
| Specification | Value |
|---|---|
| Lifting capacity | 10,000 lb (4.5 T); same for 4TPD10SSR1 and 4TPD10SSR4 |
| Rise height (overall lifting height) | 21.4 in (raised); same for both part numbers |
| Lowered / drive-over height | 4 in collapsed |
| Overall footprint (width x length) | 78 1/2 in x 92 1/2 in (78.5 in x 92.5 in) |
| Lifting time | 30 seconds at 220V (4TPD10SSR1); 50 seconds at 110V (4TPD10SSR4) |
| Electrical supply | Offered 220V or 110V single-phase: 4TPD10SSR1 = 220V (dealer sheet lists it as 230V-1ph), 4TPD10SSR4 = 110V. Amperage, frequency and circuit sizing are not published on the manufacturer page |
| Power unit / pump | US-made Bucher pump and motor; the 220V build (4TPD10SSR1) is described by Coats as powered by a USA-made 220V Bucher pump |
| Max distance from lift to power unit | 27 in |
| Hydraulics | Twin hydraulic cylinders |
| Lock system | Auto-engaging mechanical locks with a mechanical lock foot release on either side |
| Lifting pads supplied | Four 1 1/2 in low pads and four 3 in medium pads included; truck pads sold separately |
| Shipping weight | 866 lb |
| ALI certification | No Coats source states ANSI/ALI ALCTV certification for 4TPD10SSR1/4TPD10SSR4. The Coats low-profile lift brochure only makes the general company statement that Coats distributes ALI-certified lifts and is an ALI Associate Member, which is not a model-specific certification claim. Do not publish an ALI-certified claim for this model without an entry in the ALI Directory of Certified Lifts naming this model |
Not published by Coats: Drive-thru clearance / drive-thru width (Coats describes a "drive thru design" but publishes no clearance dimension for this model; Overall height in the sense of a structural/mast height other than the 21.4" raised and 4" lowered figures; Motor horsepower, voltage tolerance, amperage draw; Arm configuration details (cantilever arm lengths, arm swing/reach. Liftnow will confirm these directly with the factory on request rather than quote an estimate.
Key Features
Low-rise cantilever pad design with open front, rear and c
Low-rise cantilever pad design with open front, rear and centre , no tire bars or torsion rods between lifting points
Collapses to 4" and lifts to 21
Collapses to 4" and lifts to 21.4" for a true low-rise, space-saving footprint of 78 1/2" x 92 1/2"
Auto-engaging mechanical locks with mechanical lock foot r
Auto-engaging mechanical locks with mechanical lock foot release on either side
Twin hydraulic cylinders and a corrosion-resistant powder-
Twin hydraulic cylinders and a corrosion-resistant powder-coated frame
USA-made Bucher pump; 220V build lifts in 30 seconds, 110V
USA-made Bucher pump; 220V build lifts in 30 seconds, 110V build in 50 seconds
Includes four 1 1/2" low pads and four 3" medium pads; tru
Includes four 1 1/2" low pads and four 3" medium pads; truck pads available separately
Ideal Applications
Frequently Asked Questions
What is the lifting capacity of the Coats 10,000 lb Scissor Low Rise Pad Lift?+
Does Liftnow handle freight and installation?+
Can this be purchased on a cooperative contract?+
Ready to put a Coats lift in your bay?
Contact Liftnow for pricing, lead times and cooperative purchasing options.
Buying Coats 10,000 lb Scissor Low Rise Pad Lift for a government or commercial fleet? Liftnow handles the full project on one purchase order: equipment, freight, installation, ALI inspection, and first-year service. Public agencies can purchase through Sourcewell contract 121223-LFT or NASPO ValuePoint CW7256 and skip the RFP process, with financing available. Request a quote, call 800-543-8669, or email gov@liftnow.com.
One vendor, one PO, full warranty: Liftnow sells, delivers, and installs the lift and passes through the manufacturer’s warranty, with no separate suppliers and installers to coordinate.
See recent public-sector installations in our government project portfolio.
New to spec’ing lifts for a fleet? Read our Sourcewell vehicle-lift buyer guide.
Comparing models across brands? See our vehicle lift comparison.
