Coats 16,000 lb Scissor Alignment Lift
Coats 16,000 lb Scissor Alignment Lift supplied by Liftnow on Sourcewell and NASPO cooperative contracts, freight and installation included.
Have product questions? Call our customer care: 24/7 SUPPORT 1-800-LIFTNOW
Overview
The Coats 16,000 lb Scissor Alignment Lift is supplied by Liftnow on Sourcewell and NASPO cooperative contracts, with freight and installation coordinated on a single purchase order.
The Coats 16K Scissor Alignment Lift is a 16,000 lb capacity drive-on scissor lift with 203 in. runways, available surface mount (4TS16OSAR1) or flush mount (4TS16OSAR1FM), in an open-front configuration for wheel alignment work. Coats states it is intended for cars, light and medium duty trucks, vans and EVs, and that it accommodates an 84 in.,160 in. wheelbase for four-wheel alignments. It uses vertical breakaway/breakout cylinders to assist lifting and reduce operating pressure, non-flex double-wall runways with an internal full-length "Z" rail, front radius (turn) plate pockets and rear slip plates. It suits alignment bays and general service shops, including fleet and municipal shops, that need medium-duty capacity on a drive-on alignment rack rather than swing-arm lift.
Configurations
Liftnow can quote any of these on the same cooperative contract.
Specifications
| Specification | Value |
|---|---|
| Lifting capacity | 16,000 lb (7.3 ton); same for 4TS16OSAR1 and 4TS16OSAR1FM |
| Rise height (raised runway height) | 74 in. raised height, as published on the Coats 16K Scissor product page |
| Lifting time | 58 seconds (full rise), per the Coats 16K Scissor product page and the Coats lift line listing |
| Electrical supply | 230V , 60 Hz , 1 Ph , 25 amp |
| Overall width (footprint width) | 91 1/2 in. footprint width (published footprint 91 1/2 inw x 260.75 ind x 74 inh). Coats does not separately publish an "overall width" figure for this model |
| Deck / runway length | 203 in. , same for surface mount (4TS16OSAR1) and flush mount (4TS16OSAR1FM) |
| Overall length | CONFLICTING: the Coats 16K Scissor product page states 260 3/4 in. (surface mount, 4TS16OSAR1) and 237 in. (flush mount, 4TS16OSAR1FM). Confirm with Coats before quoting |
| Ceiling height requirement | 12 ft minimum |
| Shipping weight | 6,750 lb |
| Alignment wheelbase range (4-wheel) | 84 in. , 160 in. wheelbase for four-wheel alignments |
| Arm configuration | Not an arm-type lift. Drive-on scissor design with two 203 in. non-flex double-wall runways, open front, front radius (turn) plate pockets and rear slip plates with open runway slots beneath. No swing arms or arm pads; optional heavy-duty rolling jacks / jacking beams are used for wheels-free service |
| Mounting configurations | Surface mount = 4TS16OSAR1; flush mount = 4TS16OSAR1FM (both open front, 203 in. runway) |
| ALI certification | Do not claim ALI certification for this model without a Coats confirmation or an Automotive Lift Institute directory listing |
Not published by Coats: ALI / ANSI-ALI ALCTV certification status for 4TS16OSAR1 and 4TS16OSAR1FM specifically (no model-level source found; Overall height (Coats publishes raised runway height of 74 in. and a 12 ft ceiling requirement; Drive-thru clearance / drive-thru width for the 16K scissor alignment lift (the 89 1/8 in. figure found on coatscompany.com belongs to the 12K 2-Post lift and must not be applied here); Motor specification (horsepower, phase options, motor type). Liftnow will confirm these directly with the factory on request rather than quote an estimate.
Key Features
Vertical breakaway (breakout) cylinders assist lifting and
Vertical breakaway (breakout) cylinders assist lifting and reduce operating pressure on this high-capacity lift
Rated by Coats for cars, medium duty trucks, vans and EVs;
Rated by Coats for cars, medium duty trucks, vans and EVs; alignment scissor lifts offered in standard and extended length
Non-flex double-wall runways with an internal full-length
Non-flex double-wall runways with an internal full-length "Z" rail to resist twisting and hold alignment accuracy
Open runway slots under the rear slip plates so water, dir
Open runway slots under the rear slip plates so water, dirt and debris do not collect; enclosed plated steel slip plate balls
Fully adjustable floor-mounted gear locks for precise leve
Fully adjustable floor-mounted gear locks for precise leveling and reduced shimming
Chrome-plated ID cylinders with premium seals, and Zerk gr
Chrome-plated ID cylinders with premium seals, and Zerk grease fittings on moving parts
Ideal Applications
Frequently Asked Questions
What is the lifting capacity of the Coats 16,000 lb Scissor Alignment Lift?+
Does Liftnow handle freight and installation?+
Can this be purchased on a cooperative contract?+
Ready to put a Coats lift in your bay?
Contact Liftnow for pricing, lead times and cooperative purchasing options.
Buying Coats 16,000 lb Scissor Alignment Lift for a government or commercial fleet? Liftnow handles the full project on one purchase order: equipment, freight, installation, ALI inspection, and first-year service. Public agencies can purchase through Sourcewell contract 121223-LFT or NASPO ValuePoint CW7256 and skip the RFP process, with financing available. Request a quote, call 800-543-8669, or email gov@liftnow.com.
One vendor, one PO, full warranty: Liftnow sells, delivers, and installs the lift and passes through the manufacturer’s warranty, with no separate suppliers and installers to coordinate.
See recent public-sector installations in our government project portfolio.
New to spec’ing lifts for a fleet? Read our Sourcewell vehicle-lift buyer guide.
Comparing models across brands? See our vehicle lift comparison.
