Coats 16,000 lb Scissor Service Lift
Coats 16,000 lb Scissor Service Lift supplied by Liftnow on Sourcewell and NASPO cooperative contracts, freight and installation included.
Have product questions? Call our customer care: 24/7 SUPPORT 1-800-LIFTNOW
Overview
The Coats 16,000 lb Scissor Service Lift is supplied by Liftnow on Sourcewell and NASPO cooperative contracts, with freight and installation coordinated on a single purchase order.
The Coats 16K scissor lift is a 16,000 lb capacity, full-rise, drive-on runway scissor lift offered in open-front surface-mount (4TS16OSSR1) and flush-mount (4TS16OSSR1FM) configurations. It uses two double-walled runways with an internal full-length "Z" rail, a 203" deck length, and rises to 74" in 58 seconds on a 230V single-phase supply. Coats states the platform is intended for cars, vans, and light- to medium-duty trucks, including EVs. It suits shops and fleet facilities that need high-capacity under-vehicle service or alignment work in a bay with at least a 12 ft ceiling, and that can supply 230V/60Hz/1Ph/25A.
Configurations
Liftnow can quote any of these on the same cooperative contract.
Specifications
| Specification | Value |
|---|---|
| Lifting capacity | 16,000 lb (both 4TS16OSSR1 and 4TS16OSSR1FM) |
| Rise height (raised height) | 74 in |
| Overall height (raised) | 74 in raised height per the manufacturer footprint listing (91 1/2 inw x 260.75 ind x 74 inh). Lowered/overall stowed height is not published for this part number |
| Overall width | 91 1/2 in per the Coats product page (single value shown for both part numbers) |
| Overall length | 260 3/4 in per the Coats product page (single value shown for both part numbers) |
| Deck (runway) length | 203 in |
| Lifting time | 58 seconds (full rise) |
| Electrical supply | 230V - 60 Hz - 1 Ph - 25 amp |
| Ceiling height requirement | 12 ft minimum |
| Shipping weight | 6,750 lb |
| Footprint | 91 1/2 inw x 260.75 ind x 74 inh |
| Mounting / front configuration | Open front; available surface mount (4TS16OSSR1) or flush mount (4TS16OSSR1FM) |
| Lift type / vehicle engagement | Drive-on runway (deck) scissor lift , wheel-engaging runways, not a swing-arm lift |
Not published by Coats: ALI / ANSI-ALI ALCTV certification status for part numbers 4TS16OSSR1 and 4TS16OSSR1FM specifically; Drive-thru clearance / width between runways for this part number; Lowered (drive-on) height for this part number; Motor horsepower and power unit make/model. Liftnow will confirm these directly with the factory on request rather than quote an estimate.
Key Features
Non-flex double-walled runways with an internal full-lengt
Non-flex double-walled runways with an internal full-length "Z" rail to prevent twisting or movement during service
Openings in the runway beneath the rear slip plates to pre
Openings in the runway beneath the rear slip plates to prevent water, dirt and debris from collecting
Fully adjustable floor-mounted gear locks for precise leve
Fully adjustable floor-mounted gear locks for precise leveling, reducing the amount of shimming required
Chrome plated ID cylinders with premium seals for higher l
Chrome plated ID cylinders with premium seals for higher lift cycles before service
Zerk grease fittings at moving points to reduce maintenanc
Zerk grease fittings at moving points to reduce maintenance
Double-bake powder coat finish for corrosion protection
Double-bake powder coat finish for corrosion protection
Ideal Applications
Frequently Asked Questions
What is the lifting capacity of the Coats 16,000 lb Scissor Service Lift?+
Does Liftnow handle freight and installation?+
Can this be purchased on a cooperative contract?+
Ready to put a Coats lift in your bay?
Contact Liftnow for pricing, lead times and cooperative purchasing options.
Buying Coats 16,000 lb Scissor Service Lift for a government or commercial fleet? Liftnow handles the full project on one purchase order: equipment, freight, installation, ALI inspection, and first-year service. Public agencies can purchase through Sourcewell contract 121223-LFT or NASPO ValuePoint CW7256 and skip the RFP process, with financing available. Request a quote, call 800-543-8669, or email gov@liftnow.com.
One vendor, one PO, full warranty: Liftnow sells, delivers, and installs the lift and passes through the manufacturer’s warranty, with no separate suppliers and installers to coordinate.
See recent public-sector installations in our government project portfolio.
New to spec’ing lifts for a fleet? Read our Sourcewell vehicle-lift buyer guide.
Comparing models across brands? See our vehicle lift comparison.
